Hello everyone.
I hope you could help me with my project because I am at a loss for solutions.
I am a beginner in the field, which is why my last hope is found here.
So my project is to make a weather station in two parts, one which is outside and the other which is inside my home. These are the exterior part which causes all the sensors to give me a problem. So I have a total of 3 sensors that I can't get to work and I don't know why if these are the code or if these are the connections I tried them all, nothing to do I can't find the solution. In the 3 sensors I have 2 sensors which are the same... So I have an AS3935 ([AS3935](https://fr.aliexpress.com/item/32828168133.html?spm=a2g0o.order_list.order_list_main.15.5f345e5bdLxswQ&gatewayAdapt= glo2fra)) which must be a sensor for thunderstorms and lightning, and the other two sensors are for wind ([Wind Sensor](https://fr.aliexpress.com/item/1005005579975730.html?spm=a2g0o.order_list.order_list_main.41.5f345e5bdLxswQ&gatewayAdapt =glo2fra)) in RS485 Kit so I also took this: "RS485" to connect to my Arduino UNO WiFi R4. So here are the sensors that give me a problem because I can't use them (connection and code level). I haven't received any documentation on the sensors so I don't have much information, all I can tell you about the wind sensors is that it says: ZTS-3000-FSJT-N01 for the speed and ZTS-3000-FXJT-N01 for the direction, also there is marking on it Yellow 485-A and Blue 485-B which I suppose I have to connect to 2 RS485 module to the green thing with the screws?
I'm keeping my fingers crossed that someone will help me realize my project because I'm really blocked by this...
Thanks in advance.
10 posts - 4 participants